TracStar® 630 Series 2

8" IPS - 24" OD (225mm - 630mm)


The self-contained machine eliminates the need for a separate power source on the jobsite. An on-board generator powers the heater while powerful hydraulics assist all fusion functions, including the operation of the jaws, pipe lifts and facer. Models are available with advanced emission control technology that meets the EPA's latest Tier 4 standards, without the need for diesel exhaust fluid (DEF).

The TracStar® 630 Series 2 is also available as an Auto unit that controls and monitors the heat, soak, fuse and cool cycles.

Read More
 

Models

Click on a part number below for pricing and order information.


  • TracStar® 630 Series 2

    Fusion machine with ultra-low sulfur diesel engine, facer, heater, 24" OD butt fusion inserts, remote control with rechargeable batteries and lifting assembly.

    Description Part Number
    Please select a model to customize.
    High Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine AT2418501
    Please select a model to customize.
    High Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine AT2418504
    Please select a model to customize.
    Medium Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine AT2418502
    Please select a model to customize.
    Medium Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine AT2418505
    Please select a model to customize.
    Low Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine AT2418503
    Please select a model to customize.
    Low Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine AT2418506

    $0.00

  • TracStar® 630 Series 2 Automatic

    Fusion machine with ultra-low sulfur diesel engine, facer, heater, 24" OD butt fusion inserts, remote control with rechargeable batteries and lifting assembly.

    Description Part Number
    Please select a model to customize.
    High Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine AT2418401
    Please select a model to customize.
    High Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine AT2418404
    Please select a model to customize.
    Medium Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine AT2418402
    Please select a model to customize.
    Medium Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine AT2418405
    Please select a model to customize.
    Low Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine AT2418403
    Please select a model to customize.
    Low Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine AT2418406

    $0.00

Explore

Click on a photo or video below for download options.

Specifications

California Prop 65 info

Models
AT2418501 High Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine
AT2418502 Medium Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine
AT2418503 Low Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine
AT2418504 High Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine
AT2418505 Medium Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine
AT2418506 Low Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine
Weights
Machine 9,075 lbs. (4,116.3 Kg)
Vehicle 5,190 lbs. (2,354.1 Kg)
Carriage 3-Jaw - 1,412 lbs. (640.5 Kg) | 4-Jaw - 3,885 lbs. (1,762.2 Kg) |
Spreader Bar 175 lbs. (79.4 Kg)
Heater 240 lbs. (108.9 Kg)
Facer 390 lbs. (176.9 Kg)
Shipping Weight 9,250 lbs. (4,195.7 Kg)
Hydraulics
System Pressure 2,300 PSI (158.6 BAR)
Fusion Pressure 2,300 PSI (158.6 BAR)
Hydraulic Reservoir Capacity 23 Gallons (87.1 Liters)
Engine
Engine Cooling Air Cooled
Engine Fuel Type Diesel
Engine Fuel Tank Capacity 23 Gallons (87.1 Liters)
Engine Operational Fuel Tank Capacity 12 Hours
Engine Starting System Electric
Power
Heater 10,950 Watts, 50 / 60 Hz, 3 Ph
Facer Hydraulic
Power 74 HP, 3 Ph
Chassis
Frame Welded steel construction
Brake Self-locking
Mobility
Mobility Type Rubber crawler tracks
Transportation Self-propelled
Vehicle Speed 1.5 MPH
Lifting Lift points and lifting assembly
Starting System Electric
Machine Dimensions
Length 150" (3,810mm)
Width 98" (2,489.2mm)
Height 86" (2,184.4mm)
Heater Extended Height 102.8" (2,610.6mm)
Carriage Dimensions
Length 4-Jaw - 116.2" (2,951.5mm) | 3-Jaw - 60.7" (1,541.8mm) |
Width 3-Jaw - 53.5" (1,358.9mm) | 4-Jaw - 68.3" (1,734.8mm) |
Height 3-Jaw - 40.7" (1,033.8mm) | 4-Jaw - 54.3" (1,379.2mm) |
Shipping Dimensions
Length 144" (3,657.6 mm)
Width 96" (2,438.4 mm)
Height 75" (1,905 mm)

Print Specifications

Models
AT2418401 High Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine
AT2418402 Medium Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine
AT2418403 Low Cylinder Force, US Tier 4 and EU Stage IIIB Compliant Ultra Low Sulfur Diesel Engine
AT2418404 High Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine
AT2418405 Medium Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine
AT2418406 Low Cylinder Force, EU Stage IIIA Compliant High Sulfur Diesel Engine
Weights
Machine 9,115 lbs. (4,134.5 Kg)
Vehicle 5,300 lbs. (2,404 Kg)
Carriage 3-Jaw - 1,342 lbs. (608.7 Kg) | 4-Jaw - 3,815 lbs. (1,730.5 Kg) |
Spreader Bar 175 lbs. (79.4 Kg)
Heater 240 lbs. (108.9 Kg)
Facer 390 lbs. (176.9 Kg)
Shipping Weight 9,290 lbs. (4,213.9 Kg)
Hydraulics
System Pressure 2,300 PSI (158.6 BAR)
Fusion Pressure 2,300 PSI (158.6 BAR)
Hydraulic Reservoir Capacity 23 Gallons (87.1 Liters)
Engine
Engine Cooling Air Cooled
Engine Fuel Type Diesel
Engine Fuel Tank Capacity 23 Gallons (87.1 Liters)
Engine Operational Fuel Tank Capacity 12 Hours
Engine Starting System Electric
Power
Heater 10,950 Watts, 50 / 60 Hz, 3 Ph
Facer Hydraulic
Power 74 HP, 3 Ph
Chassis
Frame Welded steel construction
Brake Self-locking
Mobility
Mobility Type Rubber crawler tracks
Transportation Self-propelled
Vehicle Speed 1.5 MPH
Lifting Lift points and lifting assembly
Starting System Electric
Machine Dimensions
Length 150" (3,810mm)
Width 98" (2,489.2mm)
Height 86" (2,184.4mm)
Heater Extended Height 102.8" (2,610.6mm)
Carriage Dimensions
Length 4-Jaw - 116.2" (2,951.5mm) | 3-Jaw - 60.7" (1,541.8mm) |
Width 3-Jaw - 53.5" (1,358.9mm) | 4-Jaw - 68.3" (1,734.8mm) |
Height 3-Jaw - 40.7" (1,033.8mm) | 4-Jaw - 54.3" (1,379.2mm) |
Shipping Dimensions
Length 144" (3,657.6 mm)
Width 96" (2,438.4 mm)
Height 75" (1,905 mm)

Print Specifications

Find A Machine

for

Purchase
Certified McElroy Rental

Downloads

  • TracStar<sup>®</sup> 630 Series 2 Product Manual
    TracStar® 630 Series 2

    TracStar® 630 Series 2 Product Manual

  • TracStar<sup>®</sup> 630 Series 2 Automatic Product Manual
    TracStar® 630 Series 2 Automatic

    TracStar® 630 Series 2 Automatic Product Manual

  • TracStar® 630 Series 2 Automatic Software Downloads

  • TracStar 630 Series 2 Spec Sheet
    TracStar® 630 Series 2

    TracStar® 630 Series 2 Spec Sheet

  • TracStar 630 Series 2 Automatic Spec Sheet
    TracStar® 630 Series 2 Automatic

    TracStar® 630 Series 2 Automatic Spec Sheet

Featured Replacement

Parts & Accessories

Click on a part number for ordering information.

Inserts

Surface hardened for longer life and are serrated for maximum grip.

Spare Facer Blade Set

Spare facer blades.

3615710 Standard Facer Blade Set (6 blades)
3615710C Extended Life Facer Blade Set

Low Profile Rollers Case

For 4" IPS - 18" IPS(100mm - 450mm) Pipe.

A1867501 Case (includes 40 complete rollers)

DataLogger® 7

Tablet, transducer, machine mount, stylus, micro SD card, carrying case and Quick Start Guide.

DLP0857716 DataLogger 7 - English, Spanish, and Russian

External Bead Remover

Trim the bead created during the fusion process.

1221101 For 1 ¼" to 6" IPS pipe
1221601 Extra blades for 1221101
1221603 Extra blades for 1810102
1810102 For 4" IPS to 18" OD pipe

Hydraulic Pipe Stand

Adjustable pipe stand to properly support, position, and align pipe to be fused.

T9055701 8" - 36" Large Hydraulic Pipe Stand

In-Ditch Automatic Extension Kit

Set of 40' hydraulic extension hoses and cable. Required for use when doing Automatic in-ditch fusion.

T9002006 In-Ditch Automatic Extension Kit

In-Ditch Extension Kit

Set of 40' hydraulic extension hoses and cable. This kit is required for in-ditch fusion.

T9002007 In-Ditch Extension Kit

In-Ditch Heater/Facer Stand

Heater/Facer stand recommended for tight in-ditch installations where top loading of the heater and facer is necessary.

T9046001 In-Ditch Heater/Facer Stand

MegaMc® Pipe Stand

Powered pipe stand with lateral and vertical movement.

3645001 MegaMc 8" - 36" Pipe Stand (Gas-powered)
3645002 MegaMc 8" - 36" Pipe Stand (Diesel-powered)

MegaMc® Rollers

For 12" IPS - 78" OD(340mm - 2000mm) Pipe.

4842401 54" Roller Assembly

MegaMc® PolyHorse®

2 rack sets, powered tracked pipe stand, roller pipe stand, lifting sling, 4 outrigger pads, 8 safety cones and remote control.

4834001 220V-240V, 50/60Hz, 3Ph
Learn More

Pipe Support Stand

Height is adjustable to properly support, position and align pipe to be fused.

T9055801 8" - 36" Large Standard Pipe Stand
Learn More

Pyrometer Kit

Pryometer kit for accurately checking surface temperatures of heater.

A218804 Measures surface temperature of heater

Spare 11" Facer Blade Set

Spare facer blades.

3615712 Facer Blade Set (6 blades)
3615712C Extended Life Facer Blade Set (6 blades)

Spare Auto Control Box

Spare control box for quick replacement. For use with TracStar Auto fusion machines.

T5001813 Automatic Control Box

Spare Auto Pendant

Spare user interface for TracStar Series 2 Auto machines.

T5007112 Spare Auto Pendant

Spare Auto USB Thumb Drive & Adapter

Used for downloading fusion records from the Auto Pendant to a USB thumb drive. For use with Pendant 1 models.

AT5040101 Spare Automated USB Thumb Drive & Adapter

Spare Heater Plate Kit

Heater plates have an anti-stick coating and are required for butt fusion.

A2428506 Butt Plate Kit

Spreader Bar

Ideal for handling 40' bundles or a single joint of pipe.

8261000-0101 3,000 lbs. maximum
8261000-0201 6,000 lbs. maximum

Stub End Holder

Holds stub end fittings for butt fusion to the end of a pipe.

2419501 Stub End Holder
This website uses cookies to ensure you get the best experience. By using our site, you acknowledge that you have read and understand our Privacy Policy, our Terms and Conditions, and agree to the continued use of cookies on this site.