DL3-PPC is a program that runs on a Pocket PC with Windows Mobile 2003 SE or higher operating system. It provides a user interface to the McElroy DL3 DataLogger®.

To install this program directly from the McElroy website using USB cable and sync software.

1. Install Microsoft Synchronization software if not already on your Desktop or Notebook PC.  Windows XP uses Microsoft ActiveSync, and Windows Vista uses Mobile Device Center.
2. Connect the USB cable between the Desktop (or Notebook) PC and the TDS Recon.  ActiveSync detects the Recon.  Partnership between the Desktop PC and Recon is NOT required; simply cancel all prompts for partnership setup.  The Recon can be setup as a Guest on your Desktop PC.
3. Once connected, go back to the download page and click on the EXE installation link.  Click the Run button when prompted, and follow the on screen directions.

To install this program on your TDS Recon using USB cable, sync software, and CAB File.

1. Download the DL3-PPC CAB setup file to your Desktop or Notebook PC’s desktop.
2. Install Microsoft Synchronization software if not already on your Desktop or Notebook PC.  Windows XP uses Microsoft ActiveSync, and Windows Vista uses Mobile Device Center.
3. Connect the USB cable between the Desktop (or Notebook) PC and the TDS Recon.  ActiveSync detects the Recon.  Partnership between the Desktop PC and Recon is NOT required; simply cancel all prompts for partnership setup.  The Recon can be setup as a Guest on your Desktop PC.
4. Once connect, on ActiveSync, click Explore.
5. Right-click on the DL3-PPC file on the Desktop computer and click on Copy.
6. Go over to the Explorer window of your device opened in step 4, right click on a empty space and click Paste.
7. On your Pocket PC, tap Start > Programs > File Explorer
8. Tap My Device > My Documents > DL3-PPC
9. Wait for the installation process to complete. If an older version exists, the Pocket PC prompts you to overwrite it.
10. Once installed, you may run the program by tapping Start > Programs > McElroy DL3-PPC.

To install this program on your HP iPAQ Pocket PC using an SD card:

1. Download the DL3-PPC CAB setup file to your Desktop or Notebook PC’s desktop.
   
2. Connect an SD card reader to your Windows XP or Vista PC’s USB port and wait for it to be detected by your PC. The SD card will appear as another drive on your PC, normally the next drive letter after your CD-ROM drive. If it does not appear, it is very likely a networked drive is using the drive letter that the SD card is attempting to use. Please contact your PC or Network Administrator to resolve this problem.
   
3. Copy the DL3-PPC file on to the SD card. If you are using a McElroy supplied DL3 SD card, you may place the file in the PPC Setup Files folder on the SD card.
   
4. Follow the recommended safe-removal procedure to remove the SD card from your desktop PC.
   
5. Insert the SD card in your Pocket PC.
   
6. On your Pocket PC, tap Start > Programs > File Explorer
   
7. Tap My Device > Storage Card > PPC Setup Files > DL3-PPC
   
8. Wait for the installation process to complete. If an older version exists, the Pocket PC prompts you to overwrite it.
   
9. Once installed, you may run the program by tapping Start > Programs > McElroy DL3-PPC.