Go Back
Go Back
Go Back
Go Back
Go Back
Go Back

The Number One Choice On The Jobsite

TracStar® 618 Series 2

200mm - 450mm (8" - 18")

The new TracStar 618 Series 2 has been completely redesigned based on feedback from the field. The Series 2 machines incorporate a new cowling design that aids in heat dissipation — while providing easier access for machine maintenance. An updated electrical system increases the circuit protection and a standard battery disconnect in now incorporated for easy lockout.



Click on a part number below for pricing and order information.

A Hydraulic Clamping kit is available for all TracStar 618 models. Add HC to the end of the part number or select the Hydraulic Clamping option while customizing your machine package.

Currently viewing machines for:
  • TracStar 618

    TracStar® 618 Series 2

    Includes fusion machine, facer, 12"-18" heater, insulated heater stand and lifting assembly.


Click on a photo or video below for download options.


  TracStar® 618 Series 2
Machine 2,290 lbs (1,038.7 Kg)
4-Jaw Carriage 511 lbs (231.8 Kg)
3-Jaw Carriage 416 lbs (188.7 Kg)
Facer 94 lbs (42.6 Kg)
6" IPS - 12" DIPS Heater 28 lbs (13 Kg)
12" IPS - 18" OD Heater 34 lbs (15.4 Kg)
Shipping Weight 2,791 lbs (1,266 Kg)

Print Specifications


  TracStar® 618 Series 2
Maximum Gauge Pressure 800 PSI (55.16 BAR)
Hydraulic Reservoir Capacity 8 Gallons (30.28 Liters)

Print Specifications

  TracStar® 618 Series 2
Engine Type 20 HP Liquid Cooled
Fuel Type Diesel
Fuel Tank Capacity 5 Gallons (18.92 Liters)
Operational Tank Capacity 8 Hours
Starting System Electric

Print Specifications

  TracStar® 618 Series 2
Input None, self-contained
AC Output 120V & 240V, 60Hz, 15 Amp
Heater Power 3000 Watt
Facer Power Hydraulic

Print Specifications


  TracStar® 618 Series 2
Frame Welded steel construction
Brake Self-locking

Print Specifications

  TracStar® 618 Series 2
Tracked Rubber crawler tracks
Vehicle Speed 1.5 MPH max

Print Specifications

  TracStar® 618 Series 2
  Machine Shipping Container
Length 97.2" (2,468.9 mm) 90" (2,286 mm)
Width 56.1" (1,424.9 mm) 60" (1,524 mm)
Height 53.1" (1,348.7 mm) 62" (1,575 mm)

Print Specifications

Find A Machine


Certified McElroy Rental

Featured Article

Polyethylene Revitalizes 1800s Neighborhood

Leavenworth, founded in 1854, is the oldest city in Kansas. Workers have actually found some wooden pipelines in their unearthing, but many are cast iron that have long-served their time for the city's some 36,000 residents. Today they are corroded and they leak and burst.

Read Full Article View More Articles


Featured Replacement

Parts & Accessories

Click on a part number for ordering information.

4.63" Facer Blade Set

Includes 6 blades, screws and wrench. Must be repositioned for different pipe sizes.

T1208603 - Standard blades
T1208603C - Extended-life blades
T1208603T - Carbide blades

9.12" Facer Blade Set

Includes 6 blades, screws and wrench. Spans entire facer range without repositioning.

T1812602 - Standard blades
T1812602C - Extended-life blades

Heater Plate Kit

Set of two plates with anti-stick coating required for butt fusion. Kit includes attaching screws and wrench.

A1242108 - 6" - 12"
A1852013 - 12 " - 18"

Butt Fusion & Mitered Insert Sets

Surface hardened for longer life and are serrated for maximum grip.

Find Inserts

Facer Stand

Provides a convenient place to protect and store your facer out of the dirt and mud.


6" - 12" Heater

Microprocessor-controlled with dial thermometer to monitor temperature.

1855502 - 220-240V, 50/60Hz, 1 Ph

12" - 18" Heater

Microprocessor-controlled with dial thermometer to monitor temperature.

1852019 - 220-240V, 50/60Hz, 1 Ph

Heater Caddy

Allows the heater and heater bag frame to attach to a TracStar.

AT1818602 - For current machines
AT1818601 - For machines built before 9/2010

Lower 3-Jaw Conversion Kit

Lower 3-jaw carriage only package to adapt exisiting Rolling, TracStar or Pit Bull machine components for low pressure fusions.


Pipe Support Stand

Adjustable pipe stand to properly support, position and align pipe to be fused.

AT5066701 - Manual adjustment
AT5066702 - Hydraulic (no pump)
AT5066703 - Hydraulic & pump kit

Learn More

Low Profile Rollers

Reduces the drag on 4" to 18" pipe and protects the pipe from damage. Case includes 40 complete roller assemblies.


Learn More


A pipe-handling system that consists of a series of adjustable racks to store and help install the pipe on the job site.

1875502 - PolyHorse with PowerAssist
1875501 - Standard PolyHorse

Learn More

DataLogger® 6

Record and document fusion process parameters.

DL18001 - English, Spanish

Learn More

Stub End Holder

Self-centering stub end holder to hold stub end for butt fusion.


25' Hydraulic Extension Hoses

Set of four 25' hydraulic extension hoses. Extension hoses are included with Pit Bull HPU.


25' Heater Extension Cord

Heater extension cord.


Shipping Container

Store and transport your machine in this reusable container.


Pyrometer Kit

Accurately check surface temperatures of heater.