Go Back
Go Back
Go Back
Go Back
Go Back
Go Back

Increase Productivity

PolyHorse®

Reduce costs while handling pipe bundles more safely

The PolyHorse is a pipe-handling system that consists of a series of adjustable racks to store and help install pipe on the jobsite. The PolyHorse can reduce manpower expense, provide an efficient, less hazardous environment for handling pipe bundles and enhance productivity by 150%.

PE pipe is off-loaded from the delivery truck directly onto the PolyHorse where it is off the ground and out of the way until needed. The operator rolls the pipe down the rack and onto the integral pipe rollers where it is easily loaded into a McElroy fusion machine. This eliminates the costs for additional lifting equipment and manpower.

 

Models

Click on a part number below for pricing and order information.

  • QuickCamp

    PolyHorse®
    3" IPS - 20" OD (90mm - 500mm)

    Kit Includes 3 trusses, 3 stanchions, 6 screw jacks, 1 pivot roller support, 2 stationary rollers and wrench.

    • PolyHorse Kit with PowerAssist 1875502
      PolyHorse Kit with manual roller 1875501
      Compact PolyHorse Kit with PowerAssist 1875505
      Compact PolyHorse Kit with manual roller 1875504
      Starting At

      $8,117.00

  • QuickCamp

    MegaMc® PolyHorse®
    20" - 48" OD (500mm - 1200mm)

    Includes 2 rack sets, powered tracked pipe stand, roller pipe stand, lifting sling, 4 outrigger pads, 8 safety cones and remote control.

    • 220V - 240V, 50/60Hz, 3Ph 4834001
      380V - 415V, 50Hz, 3Ph 4834002
      Starting At

      $88,589.00

Explore

Click on a photo or video below for download options.

Specifications

  PolyHorse® (traditional 3-truss setup) MegaMc® PolyHorse®
Maximum Load 36,000 lbs (16,329.33 Kg) 70,000 lbs (31,751 Kg)
Maximum Load Per Stick N/A 10,500 lbs (4,763 Kg)
 

Print Specifications

Print Specifications

 

  PolyHorse® MegaMc® PolyHorse®
System Pressure 2300 PSI (157.6 BAR) Max. 2300 PSI (157.6 BAR) Max.
Hydraulic Reservoir Capacity 12 Gallons (45.4 Liters) 12 Gallons (45.4 Liters)
 

Print Specifications

Print Specifications

  PolyHorse® MegaMc® PolyHorse®
Engine Type 84.5 HP, 3600cc, 4-cylinder turbo 84.5 HP, 3600cc, 4-cylinder turbo
Fuel Type Diesel Diesel
Fuel Tank Capacity 23 Gallons (87 Liters) 23 Gallons (87 Liters)
Operational Tank Capacity 17 Hours 17 Hours
Starting System Electric Electric
 

Print Specifications

Print Specifications

  PolyHorse® MegaMc® PolyHorse® (240V) MegaMc® PolyHorse® (415V)
Input Voltage Requirements N/A 220V - 240V, 50/60Hz, 3Ph 380V - 415V, 50Hz, 3Ph
Minimum Power Requirements N/A 5.1 kVA / 4.1 kW 4.9 kVA / 4.1 kW
 

Print Specifications

Print Specifications

 

  PolyHorse® MegaMc® PolyHorse®
Frame Welded steel construction Welded steel construction
Brake Self-locking Self-locking
 

Print Specifications

Print Specifications

  PolyHorse® MegaMc® PolyHorse®
Tracked Rubber crawler tracks Rubber crawler tracks
Transportation Self-propelled Self-propelled
Vehicle Speed Low 1 MPH / High 1.7 MPH Low 1 MPH / High 1.7 MPH
Lifting Lift points and lifting assembly Lift points and lifting assembly
 

Print Specifications

Print Specifications

  PolyHorse® MegaMc® PolyHorse®
  Machine Shipping Container Machine Shipping Container
Length 142" (2468 mm) 144" (3658 mm) 142" (2468 mm) 144" (3658 mm)
Width 98" (2489 mm) 96" (2439 mm) 98" (2489 mm) 96" (2439 mm)
Height 79" ( 2007 mm) 75" (1905 mm) 79" ( 2007 mm) 75" (1905 mm)
 

Print Specifications

Print Specifications

Find A Machine

for

Purchase
Certified McElroy Rental

Advanced Fusion Training

Learn More

Featured Article

PolyHorse helps contractor tackle cross-country fusions

Many people have heard of a cross-country foot race. A crosscountry race is a timed event where competitors face different challenges over a fixed distance. The obstacles can range from weather to adverse terrain. The thrill of the race might be the obstacles awaiting the competitors at every turn. However, no one would blame a competitor for using a shortcut in the race, if it were legal and within the rules.

Read Full Article View More Articles

Downloads

Featured Replacement

Parts & Accessories

Click on a part number for ordering information.

PowerAssist

Attaches to the closest truss to fusion operations and uses hydraulic power from the machine to effortlessly load pipe.

1874401 - For 3" IPS - 20" OD PolyHorse

Stationary Roller

Attaches to the Screw Jack and supports the pipe for loading into the machine.

1876302 - For 3" IPS - 20" OD PolyHorse

Pivot Roller Support

Attaches to the closest truss to fusion operations and lifts the end of the pipe above the height of the jaws to load pipe into the machine.

1876301 - For 3" IPS - 20" OD PolyHorse

Screw Jack

Used to level the trusses

1875901 - For 3" IPS - 20" OD PolyHorse

Truss

Additional trusses for the 3" IPS - 20" OD PolyHorse

1875601 - Standard truss
1875602 - Compact truss

Stantion

Removable support to control pipe bundles

1877101 - For 3" IPS - 20" OD PolyHorse

Copyright © McElroy Manufacturing