Above ground or in the ditch, these revolutionary machines bring the flexibility of the smaller machines to MegaMc large-diameter fusion. It is the first fusion machine of this size specifically designed for in-ditch, close-quarter work.
The carriage is equipped with 4 jaws and the removable 3-jaw carriage is capable of top-loading the heater and facer to maximize functionality within limited spaces.
Includes fusion machine, facer, heater, 24" OD butt fusion inserts and lifting assembly.
|Machine||5905 lbs (2678 Kg)|
|4-Jaw Carriage||3790 lbs (1719 Kg)|
|3-Jaw Carriage||1350 lbs (612 Kg)|
|Facer||390 lbs (177 Kg)|
|Heater||240 lbs (109 Kg)|
|Shipping Weight||6090 lbs (2763 Kg)|
|System Pressure||2300 PSI (158 BAR) Max.|
|Hydraulic Reservoir Capacity||28 Gallons (106 Liters)|
|Motor||20HP, 3 Phase, 240V|
|Frame||Welded steel construction|
|Tires||6.90 - 9NHS, 75 PSI Max.|
|Transportation||Pulled via towing ring|
|Lifting||Lift points and lifting assembly|
|Machine||Carriage Only (In-Ditch Operations)||Shipping Container|
|Length||131" (3,327 mm)||116.5" (2,959mm)||138" (3,506 mm)|
|Width||83" (2,108 mm)||68" (1,728mm)||83" (2,109 mm)|
|Height||69" (1,753 mm)||54.5" (1,378mm)||72" (1,829 mm)|
Includes 6 blades, screws and wrench. Must be repositioned for different pipe sizes.
Includes 6 blades, screws and wrench. Spans entire facer range without repositioning.
Set of two plates with anti-stick coating required for butt fusion. Kit includes attaching screws and wrench.
Surface hardened for longer life and are serrated for maximum grip.
Adjustable pipe stand to properly support, position and align pipe to be fused.Learn More
Powered pipe stand with lateral and vertical movement for 8" - 36" (20mm - 900mm) pipeLearn More
Pipe handling system for 20" to 48" OD (500mm to 1,200mm) pipeLearn More
Reduce the drag on 12" IPS to 54" IPS pipe and protect the pipe from damage.Learn More
Reduces the drag on 4" to 18" pipe and protects the pipe from damage. Case includes 40 complete roller assemblies.Learn More
Record and document fusion process parameters.
DL16001 - English*
* More languages are available
Holds stub end for butt fusion
Set of 40' hydraulic extension hoses and cable. Required for in-ditch fusion.
Heater/Facer stand recommended for tight in-ditch installations where top-loading of the heater and facer is necessary.
Ideal for handling 40' bundles or a single joint of pipe.
Trim the bead created during the fusion process.
Accurately check surface temperatures of heater.