Pit Bull® 618

6" IPS - 18" OD (160mm - 450mm)


Rugged and reliable, the Pit Bull® 618 was built for jobsites where wheeled or tracked vehicles are not needed. Ready for the ditch or any other tight space, the Pit Bull 618 is as tough as they come.

The machine is compact while retaining many of McElroy's popular features including the patented Centerline Guidance System for equal distribution of force around the joint.

Read More
 

Models

Click on a part number for ordering information.


  • Pit Bull® 618

    Fusion carriage, facer and heater. All Pit Bull carriages require 240V Hydraulic Power Unit (HPU), sold separately.

    Description Part Number
    Please select a model to customize.
    Low Force A18P1025060
    Please select a model to customize.
    Low Force A18P1025193
    Starting at

    $61,310.00

Explore

Click on a photo or video below for download options.

Specifications

California Prop 65 Info

Models
A18P1025060 Low Force
A18P1025193 Low Force
Weights
Heater 34 lbs. (15.4 Kg)
Shipping Weight 690 lbs. (313 Kg)
Power
Minimum Power Requirements 3 kW
Heater 4,300 Watts, 50 / 60 Hz, 1 Ph
Machine Dimensions
Length 44" (1,117.6mm)
Width 43" (1,092.2mm)
Height 33" (838.2mm)
Shipping Dimensions
Length 60" (1,524 mm)
Width 53" (1,346.2 mm)
Height 35" (889 mm)

Print Specifications

Models
T1810901 240V, 60Hz, 1Ph
T1810902 240V, 50/60Hz, 3Ph
Weight
Weight 390 lbs. (176.9 Kg)
Hydraulics
System Pressure 1,500 PSI (103.4 BAR)
Hydraulic Reservoir Capacity 10 Gallons (37.9 Liters)
Pump Flow Rate 50Hz 5 GPM (18.9 LPM)
Pump Flow Rate 60Hz 6.1 GPM (23.1 LPM)
Filtration 10 micron absolute
Motor
Power 5 HP
Power
240V, 50/60Hz, 3Ph Minimum Power Requirements 8.2 kVA / 13.4 Amps
240V, 60Hz, 1Ph Minimum Power Requirements 7.9 kVA / 21.5 Amps
240V, 50/60Hz, 3Ph Input Voltage Requirements 220-240V, 50 / 60 Hz, 3 Ph
240V, 60Hz, 1Ph Input Voltage Requirements 220-240V, 60 Hz, 1 Ph
240V, 50/60Hz, 3Ph Plug type NEMA L15-20P
240V, 60Hz, 1Ph Plug type 50A, 2 Pole, 3 Wire Locking
Mobility
Mobility Type High-flotation inflatable tires
Transportation Two-wheel cart
Machine Dimensions
Length 48" (1,219.2mm)
Width 32.5" (825.5mm)
Height 41" (1,041.4mm)

Print Specifications

Downloads

  • Pit Bull<sup>®</sup> 618 Product Manual
    Pit Bull® 618

    Pit Bull® 618 Product Manual

  • Pit Bull 618 Hydraulic Clamping PP Spec Sheet
    Pit Bull® 618

    Pit Bull® 618 Spec Sheet

  • EP1500P Spec Sheet
    EP1500P

    EP1500P Spec Sheet

Featured Replacement

Parts & Accessories

Click on a part number for ordering information.

Inserts

Surface hardened for longer life and are serrated for maximum grip.

25' Extension Cord

For use with non-automated machines when fusing in-ditch.

Part Number Description
1219002 240V, 1Ph, 15A Cord

6" IPS Polyvalve Conversion Kit

Converts a standard 6" Hot Tapping Tool to a 6" Polyvalve Hot Tap Tool. Kit includes 3" OD cutter.

Part Number Description
220305 6" IPS Polyvalve Kit

DataLogger® 7

Tablet, transducer, machine mount, micro SD card, removable battery, screen protector, carrying case and Quick Start Guide.

Part Number Description
DLP0857716 DataLogger 7 - English, Spanish, and Russian

EP1500P HPU

HPU, hydraulic extension hoses, and operator's manual.

Part Number Description
T1810901 240V, 60Hz, 1Ph
T1810902 240V, 50/60Hz, 3Ph

External Bead Remover

Trim the bead created during the fusion process.

Part Number Description
1221101 For 1 ¼" to 6" IPS pipe
1221601 Extra blades for 1221101
1221603 Extra blades for 1810102
1810102 For 4" IPS to 18" OD pipe

Heat Shield

For fusing two materials with different melt rates. Shields the faster melt rate materials from over melting.

Part Number Description
203009 Heat Shield

Hot Tap Tool

Hot tap tool, rachet wrench, and storage case.

Part Number Description
Part Number Description
Part Number Description
220002 2" IPS
220003 2" IPS
220106 3" IPS
220107 3" IPS
220206 4" IPS
220207 4" IPS
220302 6" IPS
220303 6" IPS
247201 63mm
247301 90mm
247302 110mm
247401 125mm
247402 160mm

Hydraulic Extension Hoses

Required for in-ditch fusion.

Part Number Description
1219105 25ft Extension Hose Set (4 hoses)

Low Profile Rollers

Set includes 2 individual rollers. Case includes 40 complete rollers.

Part Number Description
A1867501 Case (includes 40 complete rollers)

Pipe Support Stand

Height is adjustable to properly support, position and align pipe to be fused.

Part Number Description
T5070901 4" - 20" Pipe Stand with Manual Chain Height Adjustment
Learn More

Pyrometer Kit

Pryometer kit for accurately checking surface temperatures of heater.

Part Number Description
A218804 Measures surface temperature of heater

Self-Centering Stub End Holder

Self-centering stub end holder to hold stub end for butt fusion.

Part Number Description
1879101 Stub End Holder for 500 and 618 lines of machines

Spare 4.63" Facer Blade Set

Spare facer blades.

Part Number Description
T1208603 Facer Blade Set (6 Blades)
T1208603C Extended Life Facer Blade Set (6 Blades)
T1208603T Carbide Facer Blade Set (6 Blades) for abrasive materials

Spare 9.12" Facer Blade Set

Spare facer blades.

Part Number Description
T1812602 Facer Blade Set (6 Blades)
T1812602C Extended Life Facer Blade Set (6 Blades)
X

Need Help?

Find the right Acrobat™ package for your job

Get Started

This website uses cookies to ensure you get the best experience. By using our site, you acknowledge that you have read and understand our Privacy Policy, our Terms and Conditions, and agree to the continued use of cookies on this site.