Models | |
---|---|
AT2505501 | High Force, 240V |
AT2505503 | Low Force, 240V |
Weights | |
---|---|
Carriage | 3-Jaw - 124 lbs. (56.2 Kg) | 4-Jaw - 247 lbs. (112 Kg) | |
Heater | 27 lbs. (12.2 Kg) |
Facer | 44 lbs. (20 Kg) |
Shipping Weight | 315 lbs. (142.9 Kg) |
Power | |
---|---|
Heater | 3,000 Watts, 50 / 60 Hz, 1 Ph |
Facer | Hydraulic |
Heater Plug type | CEE 7/7 |
Carriage Dimensions | |
---|---|
Length | 3-Jaw - 30" (762mm) | 4-Jaw - 44" (1,117.6mm) | |
Width | 30" (762mm) |
Height | 23" (584.2mm) |
Shipping Dimensions | |
---|---|
Length | 48" (1,219.2 mm) |
Width | 40" (1,016 mm) |
Height | 31" (787.4 mm) |
Models | |
---|---|
AT2505502 | High Force, 240V |
AT2505504 | Low Force, 240V |
Weights | |
---|---|
Carriage | 3-Jaw - 170 lbs. (77.1 Kg) | 4-Jaw - 293 lbs. (132.9 Kg) | |
Heater | 27 lbs. (12.2 Kg) |
Facer | 44 lbs. (20 Kg) |
Shipping Weight | 343 lbs. (155.6 Kg) |
Power | |
---|---|
Heater | 3,000 Watts, 50 / 60 Hz, 1 Ph |
Facer | Hydraulic |
Heater Plug type | CEE 7/7 |
Carriage Dimensions | |
---|---|
Length | 44" (1,117.6mm) |
Width | 30" (762mm) |
Height | 23" (584.2mm) |
Shipping Dimensions | |
---|---|
Length | 48" (1,219.2 mm) |
Width | 40" (1,016 mm) |
Height | 31" (787.4 mm) |
Models | |
---|---|
T1810901 | 220-240V, 60Hz, 1Ph HPU |
T1810902 | 220-240V, 50/60Hz, 3Ph HPU |
Machine Dimensions | |
---|---|
Length | 48" (1,219.2mm) |
Width | 32.5" (825.5mm) |
Height | 41" (1,041.4mm) |
Weight | |
---|---|
Weight | 390 lbs. (176.9 Kg) |
Hydraulics | |
---|---|
System Pressure | 1,500 PSI (103.4 BAR) |
Fusion Pressure | 1,500 PSI (103.4 BAR) |
Hydraulic Reservoir Capacity | 10 Gallons (37.9 Liters) |
Pump Flow Rate 50Hz | 5 GPM (18.9 LPM) |
Pump Flow Rate 60Hz | 6.1 GPM (23.1 LPM) |
Filtration | 10 micron absolute |
Power | |
---|---|
EP1500P (220V - 240V) Output Power | 5 HP, 3 Ph, 13.4 Amps, 8.2 kVA |
EP1500P (220V - 240V) Output Power | 5 HP, 1 Ph, 21.5 Amps, 7.9 kVA |
EP1500P (220V - 240V) Plug type | 50A, 2 Pole, 3 Wire Locking |
EP1500P (220V - 240V) Plug type | NEMA L15-20P |
Mobility | |
---|---|
Mobility Type | High-flotation inflatable tires |
Transportation | Two-wheel cart |
Heaters have a microprocessor control and a dial thermometer to monitor temperature.
T2516001 | 220-240V, 50/60Hz, 1Ph Heater |
For 4" IPS - 18" IPS(100mm - 450mm) Pipe.
A1867501 | Case (includes 40 complete rollers) |
Aids in lifting pipe into the fusion machine and also performs as a pipe stand.
864201 | Pipe Stand and Dolly |
Converts a standard 6" Hot Tapping Tool to a 6" Polyvalve Hot Tap Tool. Kit includes 3" OD cutter.
220305 | 6" IPS Polyvalve Kit |
Tablet, transducer, machine mount, stylus, micro SD card, carrying case and Quick Start Guide.
DLP0857716 | DataLogger 7 - English, Spanish, and Russian |
Facer stand provides a convenient place to protect and store your facer out of the dirt and mud.
T801101 | Facer Stand |
For fusing two materials with different melt rates. Shields the faster melt rate materials from over melting.
203006 | Heat Shield |
Height is adjustable to properly support, position and align pipe to be fused.
906501 | 1" - 8" Pipe Stand |
3 trusses, 3 stanchions, 6 screw jacks, 1 pivot roller support, 2 stationary rollers and wrench.
1875501 | Standard PolyHorse |
1875502 | PolyHorse with PowerAssist |
Pryometer kit for accurately checking surface temperatures of heater.
A218804 | Measures surface temperature of heater |
Self-centering stub end holder to hold stub end for butt fusion.
885001 | Stub End Holder |
Heater plates have an anti-stick coating and are required for butt fusion.
AT2501101 | Heater Butt Plate Kit |
For organizing your inserts and adapters for safe keeping.
SW16001 | For organizing your inserts and adapters for safe keeping. |