The Acrobat 250 fusion machine has a lightweight design and small footprint allowing operators to fuse pipe in small trenches and other areas where space is limited. To further reduce its footprint, the carriage can be configured from 4 to 3 jaws without tools.
The Acrobat is compatible with two hydraulic power units (HPUs) designed to meet the maximum system pressure desired on your jobsite. Two carriage pressure configurations are available: low force, for low-drag situations or thinner-walled pipe; and high-force, for high drag and vertical applications. Both allow the operator to preset the facing, heating and fusing pressures.
Includes fusion machine, facer, heater, inserts (low force machines only), insulated heater basket, facer stand, HPU and shipping container.
|Cylinder Force||Maximum Gauge Pressure||HPU
|Low||800 PSI (55.2 BAR)||110-120V, 60Hz, 1 Phase||A2500101|
|Low||800 PSI (55.2 BAR)||220-240V, 50/60Hz, 1 Phase||A2500102|
|High||800 PSI (55.2 BAR)||110-120V, 60Hz, 1 Phase||A2500109|
|High||800 PSI (55.2 BAR)||220-240V, 50/60Hz, 1 Phase||A2500110|
Includes fusion machine, facer, heater, insulated heater basket, facer stand, HPU and shipping container.
|4-Jaw Carriage||53.6 lbs. (24.3 Kg)|
|3-Jaw Carriage||38.1 lbs. (17.3 Kg)|
|Facer||39.8 lbs. (18.1 Kg)|
|Heater||20 lbs. (9.1 Kg)|
|Acrobat HPU (Hydraulic Power Unit)||56 lbs. (25.4 Kg)|
|DynaMc HPU (Hydraulic Power Unit)||115 lbs. (52.1Kg)|
|Acrobat HPU Maximum Gauge Pressure||800 PSI (55.2 BAR)|
|DynaMc HPU Maximum Gauge Pressure||1,500 PSI (103.4 BAR)|
|Heater||120V - 1.75 kW
240V - 3 kW
|Facer Power||120V - 10 Amp
240V - 5 Amp
|Input Voltage Requirements||120V - 60Hz, 1 Ph
240V - 50/60Hz, 1 Ph
|Acrobat HPU Power||120V - .3 HP/ 5.9 Amp
240V - .3 HP/ 2.4 Amp
|DynaMc HPU Power||120V - 2.2HP/ 14 Amp
240V - 2.2HP/ 7 Amp
|Plug Type||120V - Nema 5-15
240V - CEE 7/7
|Frame||Welded aluminum construction|
|Acrobat™ 250||Acrobat HPU||DynaMc Hpu|
|4-Jaw Carriage||3-Jaw Carriage|
|Length||30.1" (765mm)||21.1 (536mm)||22.1" (562 mm)||24.5" (622 mm)|
|Width||18.25" (464mm)||18" (457mm)||13.5" (335 mm)||11" (280 mm)|
|Height||17" (432mm)||14.75" (375mm)||19" (483 mm)||21.5" (546 mm )|
Surface hardened for longer life and are serrated for maximum grip.