Customize Your Machine Package

Butt Fusion Inserts

Butt Fusion Insert

McElroy fusion machines will fuse a range of pipe sizes. To be able to fuse multiple pipe sizes you will need to purchase inserts for the pipe sizes you want to fuse. Inserts are made for one size pipe only and not all inserts fit directly in the jaws. Some inserts nest inside other inserts, called master inserts. These master inserts will need to be purchased also.

Set = 8 Inserts

Selected Machine

DynaMc® 250, 2-Jaw, 120V Facer, 240V Heater - A900401

DynaMc<sup>®</sup> 250 2-Jaw EP

All inserts below fit in DynaMc® 250 jaws

     Inserts Pipe OD Part No.
   225mm/250mm 8.86 (225mm) T2503517
   8"IPS/250mm 8.63 (219mm) T2503516

All inserts below require 8"IPS/250mm insert

     Inserts Pipe OD Part No.
   200mm 7.87 (200mm) 801548
   7.125" (180mm) OD 7.13 (180mm) 801549
   6" DIPS 6.90 (175mm) 801550
   6" IPS Master 6.63 (168mm) 801547
   160mm 6.30 (160mm) 8078148

All inserts below require 6" IPS Master insert

     Inserts Pipe OD Part No.
   5" IPS 5.56 (141mm) 809435
   140mm 5.51 (140mm) 809439
   5.375" OD 5.38 (137mm) 809437
   5.25" OD 5.25 (133mm) 809436
   125mm 4.92 (125mm) 809438
   4" DIPS 4.80 (122mm) 809327
   4" IPS 4.50 (114mm) 809434
   110mm 4.33 (110mm) 809324
   3" DIPS 3.96 (101mm) 809326
   90mm 3.54 (90mm) 809325
   3" IPS 3.50 (89mm) 809323
   75mm 2.95 (75mm) 809217
   63mm 2.48 (63mm) 809216
   2" IPS 2.38 (60mm) 809215

Copyright © McElroy Manufacturing