DL3-PPCcs is a program that runs on a Simplified Chinese Pocket PC with Windows Mobile 2003 SE or higher operating system. It provides a user interface to the McElroy DL3 DataLogger®.

To install this program on your Pocket PC:

1. Download the DL3-PPCcs setup file to your PC’s desktop.
   
2. Connect an SD card reader to your Windows XP PC’s USB port and wait for it to be detected by your PC. The SD card will appear as another drive on your PC, normally the next drive letter after your CD-ROM drive. If it does not appear, it is very likely a networked drive is using the drive letter that the SD card is attempting to use. Please contact your PC or Network Administrator to resolve this problem.
   
3. Copy the DL3-PPCcs file on to the SD card. If you are using a McElroy supplied DL3 SD card, you may place the file in the PPC Setup Files > Chinese folder on the SD card.
   
4. Follow the recommended safe-removal procedure to remove the SD card from your desktop PC.
   
5. Insert the SD card in your Pocket PC.
   
6. On your Pocket PC, tap Start > Programs > File Explorer
   
7. Tap My Device > Storage Card > PPC Setup Files > Chinese > DL3-PPCcs
   
8. Wait for the installation process to complete. If an older version exists, the Pocket PC prompts you to overwrite it.
   
9. Once installed, you may run the program by tapping Start > Programs > McElroy DL3-PPCcs.