McElroy’s smallest fusion machine is designed for tight working confines.

• Better for in-ditch fusions and for operating from top of machine
• 4-to-1 mechanical advantage
• Locking cam, much like the popular 2LC
• Hand-crank facer features ball bearing construction and gear train
• Jaws use same inserts as original MiniMc™
• Electric heater sits on guide rods just like larger McElroy machines
• More compact than 2LC

Part No:  ACTS16001

McElroy has compiled the proper heater adapters, ratchet sheers, chamfer tools/depth gauges, and cold ring tools for a complete kit, perfectly suited for various industries. 

• Specially designed tool box
• Custom tray holds components
• Kits priced to save money
• No need to order components “a la carte”

Part No: ASW19101  3⁄4” to 2” IPS
Part No: ASW19201  1⁄2” CTS to 2” IPS
Part No: ASW19301  3” and 4” IPS
Part No: ASW19401  3⁄4” and 1 1⁄4” IPS

Designed to fuse popular pipe sizes in gas, sewer, and plumbing industries.

• Available in 6” DIPS or 180mm, both with standard 6” IPS insert set
• Electric facer features balance point handle
• Manually operated 2-jaw machine with locking cam like PitBull®14
• Fits on the popular Manual Fusion Stand
• Can be paired with  McElroy’s PolyPorter™ for a more efficient job site

The DynaMc™™ HP series are fusion machines that take the robust, patented features of standard McElroy machines into smaller units that pack a lot of power into a small package.

• Available in 2- and 4-jaw models
• Double-action hand pump and high-velocity cylinders create fast carriage speed for opens and closes during fusion processes
• On four-jaw units, the full-length guide rod and unique moveable third jaw allow work in close proximity to ells and tees without the removal of the outer jaw
• 1,500 psi pressure capability
• Powerful electric facer that can be loaded from either side
• Detachable easy-lift cradle for improved maneuverability to and from work site
• DataLogger® compatible

Part No:  2Jaw DynaMc™ 28 HP: A881701
Part No:  4Jaw DynaMc™ 28 HP: A881401

A former McElroy product is making a strong comeback due to industry demand.

• The Rolling 28 HP features a rolling car­riage with a 4-jaw hand-pump fusion unit
• Electric pivoting facer
• Pipe lifts included
• Double-action hand pump and high-velocity cylinders create fast carriage speed for opens and closes during fusion processes

Part No: A897601

McElroy’s EP units are versatile, provid­ing the power for a new line of fusion units.

• Meets a need between the DynaMc™ HPs (hand pump models) and DynaMc™  Autos.
• Electric pump provides power to carriage
• Available in 120- and 240-volt versions
• EP weighs approxi­mately 100 lbs.
• For 28, 250, and 412 2- and 4-jaw machines
• Used in combina­tion with a powerful electric facer

Powered by the DynaMc™ EP, the Sidewall 28 EP offers a lightweight solution to in-field saddle fusions.

• Design features one-jaw with tailstock
• Compact and easier to handle than a combination carriage
• Same saddle fusion sizes as McElroy’s 28 Combination Unit (CU)
• Powered by the DynaMc™ EP

Part No:  898101

A special fusion machine solves the problems that come with fusing pipe vertically.

• Counterbalanced, pivoting heater
• Pivoting facer
• Also capable of horizontal fusions
• Can account for negative drag
• Compact vertical fusion machine has three jaws, works with DynaMc™ EP
• Rolling wheels can come off for more compact footprint
• 4-Jaw hydraulic facer version available

Part No: A893101 Vertical 28 machine
Part No: A893001 DynaMc™ Vertical Compact 28 EP

One of the more popular features of large-diameter MegaMc® fusion machines — hydraulic clamping — is now available on the 412, 618, and 500. 

• Increased productivity due to not requiring manual cranking of clamp knobs
• Less time spent working with jaw operation and more time spent fusing pipe
• Quick disconnect hydraulic fittings are provided for fusing tees, ells, and tie-ins
• Retrofit kit can be installed at your local McElroy distributor

Part No: A1262301 - Retrofit Kit for Rolling and TracStar 412
Part No: A1870301 - Retrofit Kit for Rolling and TracStar 618
Part No: AT5044801 - Retrofit Kit for TracStar 500

*Please visit our website for full compatibility details for retrofit kits.  New machines can be ordered with hydraulic clamping pre-installed.

The MegaMc Pipe Stand is self-contained, gasoline-powered for holding and maneuver­ing pipe to the level of the fusion machine.

• 2 models designed — for 8”-36” pipe and 36" to 65" pipe
• 16,000 lbs. maximum capacity
• Self-contained, gasoline-powered HPU with no hydraulic extension hoses across job site
• While fully loaded, capable of lateral and vertical adjustments to align pipe in fusion machine
• Height locks in place, even with engine off
• Rugged 6 5/8" diameter rollers with low friction pillow block bearings
• Wide base for stability

Part No: 3645001 8” - 36” MegaMc Pipe Stand
Part No: 6513501 36” – 65” MegaMc Pipe Stand

• Meets MIL-STD-810F standards for drops, vibration, and temperature extremes
• Records and docu­ments key parameters of the fusion process
• 4,000 psi transducer
• Easily recognizable from previous models with “McElroy green” molded top
• Transfers joint reports to PC via standard USB port
• Provides familiar Microsoft® Windows® user interface
• Designed for situa­tions where Bluetooth communications could interfere with job site communications

Part No:  DL6304

Wireless DataLogger
A wireless method of recording key parameters of the fusion process

• Meets MIL-STD-810F standards for drops, vibration, and temperature extremes
• Wireless connection available via Bluetooth®
• Provides familiar Microsoft Windows user interface
• Program and joint reports store in nonvolatile memory
• Transfers joint reports to PC via standard USB port and Microsoft ActiveSync
• 2,000 psi transducer
• Battery-operated for portability