No.824/630
Overview
Models
Gallery
Images
Animations
Videos
Resources
Catalog Section
References
Older Equipment
Cylinder Selection
Parts Finder
Specifications
Accessories
Available Inserts
Warranty


Request a Catalog

Language

 
 
McElroy > Products > No.824 > Inserts
Butt Inserts
Mitered Inserts

Inserts are made for one size pipe only and are required for pipe sizes less than 630mm OD. Some inserts may be purchased as a fabricated or cast insert. Not all inserts fit directly in the jaws. Some inserts nest inside other inserts. called master inserts.

CAST vs FABRICATED
Cast inserts are made from a high strength aluminum alloy and have been surfaced hardened for longer life. Fabricated inserts are constructed out of precision laser cut carbon stell and rolled components to ensure proper alignment in the jaws. They are normally lighter in weight than cast inserts. All inserts are serrated for maximum grip on the pipe.

Master Inserts
Insert or Master
Inserts

Note: Other sizes of inserts are available upon request. Contact your McElroy representative about inserts to fit your needs.

 

Mitered inserts are used to fabricate segmented ells. All inserts are surface hardened for longer life and are serrated for maximum grip on the pipe.

Inserts are made for one size pipe only. Some inserts nest inside other insert called master inserts.


Note: Other sizes and angles of inserts are available upon request. Contact your McElroy representative about inserts to fit your needs.

All inserts below fit in No.824/630 Jaws
Inserts
Pipe OD
Set No.
630mm JAW
24.80 (630mm)
N/R
24’’ OD FAB
24.00 (610mm)
2402301
22’’ OD
22.00 (560mm)
2411919
20’’ DIPS
21.60 (549mm)
2411922
20’’ OD
20.00 (508mm)
2412010
500 mm
19.69 (500mm)
2412011
18’’ DIPS
19.50 (495mm)
2412023
18’’
18.00 (457mm)
2411708

All inserts below require 18" OD Master Inserts
Inserts
Pipe OD
Set No.
450 mm
17.72 (450mm)
N/A
450 mm FAB
17.72 (450mm)
2418201
16’’ DIPS
17.40 (442mm)
2412117
16’’ OD
16.00 (406mm)
2412110
400 mm
15.75 (400mm)
2412111
14’’ DIPS
15.30 (389mm)
2412215
14’’ OD
14.00 (355mm)
2412206
340 mm
13.39 (340mm)
2411811
12’’ DIPS
13.20 (335mm)
2411826
12’’
12.75 (324mm)
2411810

All inserts below require 18" OD & 12 " Master Inserts
Inserts
Pipe OD
Set No.
315 mm
12.40 (315mm)
1211202
10’’ DIPS
11.10 (282mm)
1207221
280 mm
11.02 (280mm)
1207205
10’’ IPS
10.75 (273mm)
1207204
250 mm
9.84 (250mm)
1213503
8’’ DIPS
9.05 (230mm)
1207107
225 mm
8.86 (225mm)
1207010
8’’ IPS
8.63 (219mm)
1207104

 
All inserts below fit in No.824/630 Jaws
Inserts
Pipe OD
Set No.
22 OD/560mm x 11¼°
22.00 (560mm)
2421229
20’’ DIPS x 11¼°
21.60 (549mm)
2421257
20’’ OD x 11¼°
20.00 (508mm)
2421217
500mm x 11¼°
19.69 (500mm)
2412014
18’’ DIPS x 11¼°
19.50 (495mm)
2421251
450mm x 11¼°
17.72 (450mm)
2421214
18’’ OD x 11¼°
18.00 (457mm)
2421215
16’’ DIPS x 11¼°
17.40 (442mm)
2421245
420mm x 11¼°
16.53 (420mm)
2421266
18’’
18.00 (457mm)
2411708

All inserts below require 18" OD Master Inserts
Inserts
Pipe OD
Set No.
16’’ OD x 11¼°
16.00 (406mm)
2420619
400mm x 11¼°
15.75 (400mm)
2420618
14’’ DIPS x 11¼°
15.30 (389mm)
24206122
370mm x 11¼°
14.57 (370mm)
24206125
14’’ OD x 11¼°
14.00 (355mm)
2420617
12’’ DIPS x 11¼°
13.20 (335mm)
24206110
12’’ IPS x 11¼°
12.75 (324mm)
2420615
315mm x 11¼°
12.40 (315mm)
2420614
10’’ DIPS x 11¼°
11.10 (282mm)
24206116
12’’
12.75 (324mm)
2411810

All inserts below require 18" OD & 12 " Master Inserts
Inserts
Pipe OD
Set No.
280mm x 11¼°
11.02 (280mm)
1214284
10’’ IPS x 11¼°
10.75 (273mm)
1214232
250mm x 11¼°
9.84 (250mm)
1214235
8’’ DIPS x 11¼°
9.05 (230mm)
1214269
225mm x 11¼°
8.86 (225mm)
1214281
8’’ IPS x 11¼°
8.63 (219mm)
1214230
200mm x 11¼°
7.87 (200mm)
1214234
180mm x 11¼°
7.09 (180mm)
1214290

 
 
 
© 2008 McElroy Manufacturing