824/630
Resources
Literature
Catalog Section
Cylinder Selection
Spec Summary



Language

 

 
McElroy > Products > 824 > Models
   
824

The re-designed MegaMc® 824 and the new TracStar® 630 machines will butt fuse pipe sizes from 8” IPS to 24” OD (225mm to 630mm). Above ground or in the ditch, these revolutionary machines bring the flexibility of the smaller machines to MegaMc large-diameter fusion. It is the first fusion machine of this size specifically designed for in-ditch, close-quarter work with all the advantages of a track or rolling machine.

The carriage has 4 jaws with a removable 3-jaw carriage and is capable of top loading the heater and facer to maximize functionality within limited space.
   

Rolling 824
• 4- or 3-jaw capable for improved in-ditch fusion
• Carriage can be easily removed for in-ditch use
• For confined spaces, can be converted to top-loading heater and facer
• DataLogger® compatible
• Rugged outriggers for stability

 

TracStar® 630
• Track-mounted, self-contained, self-propelled, all-terrain
• On-board generator for powering heater and other devices
• Carriage can be easily removed for in-ditch use
• 4- or 3-jaw capable for improved in-ditch fusion
• For confined spaces, can be converted to top-loading heater and facer
• Dual Speed Tracks

TracStar® Automatic 630
• Track-mounted, self-contained, self-propelled, all-terrain
• On-board generator for powering heater and other devices
• Carriage can be easily removed for in-ditch use
• 4- or 3-jaw capable for improved in-ditch fusion
• For confined spaces, can be converted to top-loading heater and facer
• Dual Speed Tracks

The TracStar 630 is mounted on independently controlled, self propelled tracks and features a wireless remote driving control. Both models are hydraulically powered to assist all fusion functions including the operation of the jaws, pipe lifts, heater and facer. The machines allow for butt fusion of most fittings without special holders or removal of outer jaw. Mitered inserts are available for fabricating ells.

The Automatic TracStar 630 controls and monitors the heat, soak, fuse and cool cycles. It has a built-in datalogging feature that keeps a record of each fusion joint, which allows you to verify joint integrity.
 
 
 
© 2010 McElroy Manufacturing
 
Become a Fan

Follow Us

Watch Us