Go Back
Go Back
Go Back
Go Back
Go Back
Go Back

For Immediate Release

McElroy's new QuickCamp™ delivers at jobsite in Canada

Unique shelter and pipe-handling system attracts attention

June 9, 2014


RED DEER, Alberta — A new product by McElroy called the QuickCamp™ System was successfully tested recently at a jobsite in Canada, attracting area contractors and engineers who traveled there to get a firsthand look at the unique shelter and pipe-handling system at work.

The QuickCamp - designed to protect the pipe fusion operator and fusion joints from outside conditions - became available just as Knibb Developments was beginning construction on a 10-kilometer wastewater pipeline through the city of Red Deer using large-diameter, high-density polyethylene (HDPE) pipe.

Jason and Diane Knibb used the QuickCamp on their jobsite in May and found it to be the perfect application for fusing up to 36" pipe.

"We were able to set up the laydown yard, fusing equipment and the MegaMc® PolyHorse® to complete a 3,300-meter (11,000') stretch of 800mm (32") HDPE. This process was completed in 20 days, a noticeable increase in productivity," said Diane Knibb.

Portable tents are typically used on jobsites when pipe is being fused. But tents are a challenge when it comes to climate control and wind. The QuickCamp is a lighted, insulated shelter with heating and air-conditioning and patent-pending pipe seals, which creates a much more workable environment.

"Despite our best efforts the wind blows right through the tent. It's not a very secure structure and it doesn't have a hard floor. We usually have to build a floor," said Jason Knibb. "Working in the QuickCamp is like working in a laboratory."

The Knibb's distributor, A.H. McElroy in Edmonton, provided the onsite technical expertise and answered queries from contractors and engineers who traveled to the jobsite to see the QuickCamp System perform firsthand.

"Past experience has shown us that fusion projects take far longer to complete in cold, inclement weather. The QuickCamp ensures project performance is maintained regardless of outside influences," said Ian Powell, president of A.H. McElroy.

Knibb's operator fused pipe within the QuickCamp on a McElroy 900 carriage. Sticks of pipe were guided and aligned through the shelter by remote control from the MegaMc® PolyHorse® and MegaMc Rollers which are a series of pipe racks and hydraulically-powered pipe stands strong enough to hold the amount of pipe fused in a day.

Deploying the QuickCamp, which arrived as a 20' by 8' cargo container, was also a unique process. It was easily unfolded into a 21'8" by 24'7" shelter which also has room for an office, breakroom or storage.

"We think it's a good product and will become the standard for fusing equipment in the future," Diane Knibb said.

For more information about the QuickCamp, go to www.mcelroy.com/quickcamp.

Photos:

High resolution photos of the QuickCamp jobsite can be downloaded on Flickr.


Contact Information:
McElroy PR and Marketing Department
E-mail: marketing@mcelroy.com