Go Back
Go Back
Go Back
Go Back
Go Back
Go Back

One machine for butt, miter and socket fusion

The Polygon from McElroy is the first manual butt fusion machine that's DataLogger® compatible. It allows installers the flexibility to complete butt and miter fusions from zero- to 45-degree angles and has the additional capability to perform socket fusions. This three-in-one machine's simple design and light weight make it the ideal prefabrication tool on 63mm to 160mm polypropylene pipe jobsites.

One machine for miter, butt and socket fusion

Fuses Miter Angles on the Job

The Polygon's mitering options are designed to meet the unique complexities of mechanical piping installations and retrofits where installers must navigate around various obstructions in buildings. With the ability to perform miter fusions in the field, time and costs can be saved on purchasing and waiting on molded or fabricated fittings to be made.

Pivoting Jaws

The Polygon's quick-clamping jaws pivot in either direction which makes the machine faster and easier to set up. The rotating jaws will lock in exact angles from zero- to 45-degrees for butt or miter fusions. The jaws can also be swapped with an optional Spider™ 125 Adapter Kit for socket fusion.

Pivoting Jaws
DataLogger Compatible

DataLogger® Compatible Manual Fusion

The Polygon is McElroy's first manually-operated butt fusion machine with DataLogger capability. This provides a manually-operated solution that is more conducive to working in tight spaces with the added ability to capture joint information. These joint records are used to verify that proper fusion procedures have been followed prior to installation, which is a growing jobsite requirement. Joint records from the DataLogger can be stored and analyzed in the Vault™, a secure server on the internet. This allows quick and easy sorting, tagging and sharing of joint records by machine, joint, operator, device or job.

Learn More

Minimal Power Requirements

With a manually-powered fusion carriage and a battery-operated drill to power the facer, the only power required is for the 1,200-watt heater. This helps minimize the amount of extra power equipment needed onsite and simplifies the working space.

Minimal Power Requirements
5-Year Warranty

Industry-Leading Warranty

Guaranteed Performance

McElroy equipment is built to withstand the tough environments our industry encounters. We're confident that your machine will perform to the best of its capabilities. We've even given each piece of equipment a 5-year warranty — the longest available in the industry.

Learn More

Additional Features

  Polygon
Produces miter, butt and socket fusion joints
Quick-clamp, pivoting jaws for faster, easier setup
Adjustable, pivoting pipe supports to keep pipe level in the jaws
Quick open/close, non-back-drivable wheel drive for smooth jaw movement
Side-positioned wheel drive
Power required only for the heater; battery-operated drill powers the facer
The first manual machine with DataLogger capability to assure quality fusion joints
Sturdy travel case for easy transport of entire machine and accessories
Easy-to-view pressure gauge
Uses same inserts as the Acrobat™ 160

 

Models

Select a machine below for more detailed specifications and model-specific features.

Find a distributor near you.

McElroy's industry-leading fusion equipment can be purchased from distributors around the globe. Find one close to you.

Underground / Construction Mechanical / HVAC / Plumbing

This website uses cookies to ensure you get the best experience. By using our site, you acknowledge that you have read and understand our Privacy Policy, our Terms and Conditions, and agree to the continued use of cookies on this site.