The DynaMc 412 machine combines the robust, patented features of standard McElroy machines into smaller units for use in tight working environments.The DynaMc® 412 EP (electric pump) uses a common DynaMc EP Hydraulic Power Unit (HPU) to power a light, but rugged 2- or 4-Jaw fusion carriage.
When space is limited, an easy-lift cradle can be removed to make the machine even smaller. A strong electric facer can be loaded from either side of the carriage for more flexibility in tight confines.
Whether it is one fusion or 100, the DynaMc 412 EP provides the rugged reliability you expect from a McElroy.
|4-Jaw||263 lbs (120 Kg)|
|2-Jaw||170 lbs (77 Kg)|
|Facer||54 lbs (24.5 Kg)|
|Heater||24 lbs (10.9 Kg)|
|HPU (Hydraulic Power Unit)||115 lbs (52.1 Kg)|
|Maximum Gauge Pressure||400 PSI (27.58 BAR)|
|DynaMc® Electric Power|
|Frame||Welded aluminum construction|
|Heater Power||1750 Watt|
|Facer Power||1.6 HP, 10 Amp|
|HPU (Hydraulic Power Unit)||2.2 HP, 14 Amp|
|Input Voltage Requirements||120V, 60Hz, 1 Ph|
|Length||27" (686 mm)||34" (864 mm)||48" (1219 mm)||24.5" (622 mm)|
|Width||27" (686 mm)||27" (686 mm)||40" (1016 mm)||11" (279 mm)|
|Height||24" (610 mm)||24" (610 mm)||30" (762 mm)||21.5" (546 mm)|
A hydraulic accumulator maintains fusion pressure and reduces power consumption.
Includes 6 blades, screws and wrench. Must be repositioned for different pipe sizes.
Includes 6 blades, screws and wrench. Spans entire facer range without repositioning.
Set of two plates with anti-stick coating required for butt fusion. Kit includes attaching screws and wrench.
Surface hardened for longer life and are serrated for maximum grip.
Microprocessor-controlled with dial thermometer to monitor temperature.
Convert 1500 PSI machines to 600 PSI machines.
Provides a convenient place to protect and store your facer out of the dirt and mud.
Adjustable pipe stand to properly support, position and align pipe to be fused.Learn More
Reduces the drag on 4" to 18" pipe and protects the pipe from damage. Case includes 40 complete roller assemblies.Learn More
A pipe-handling system that consists of a series of adjustable racks to store and help install the pipe on the job site.Learn More
Record and document fusion process parameters.
DL16001 - English*
* More languages are available
Self-centering stub end holder to hold stub end for butt fusion.
Set of four 25' hydraulic extension hoses.
Heater extension cord.
Accurately check surface temperatures of heater.