The Rolling 250 incorporates a universal 4-jaw carriage that can be easily removed for fusion operations remote from the vehicle. For installations in limited space, the outer fixed jaw and skid can be removed from the carriage, converting to a 3-jaw carriage for close access in tight installations.
Includes fusion machine, facer, heater, insulated heater stand and 8" IPS / 250mm master inserts.
|Machine||575 lbs (260.8 Kg)|
|4-Jaw Carriage||201 lbs (91.2 Kg)|
|3-Jaw Carriage||122 lbs (55.3 Kg)|
|Facer||44 lbs (20 Kg)|
|Heater||27 lbs (12.2 Kg)|
|Shipping Weight||855 lbs (387.8 Kg)|
|System Pressure||800 PSI (55.16 BAR)|
|Hydraulic Reservoir Capacity||5 Gallons (18.92 Liters)|
|Input Voltage Requirements|| 120V - 60Hz, 1 Ph
220V - 50/60Hz, 1 Ph
|Electric Motor||1.5 HP|
|Frame||Welded steel construction|
|Tires||High-flotation inflatable tires|
|Transportation||Pulled via towing ring|
|Length||65.5" (1664 mm)||72" (1829 mm)|
|Width||38" (965 mm)||44" (1118 mm)|
|Height||49.5" (1257 mm)||45" (1143 mm)|
Microprocessor-controlled with dial thermometer to monitor temperature.
Set of two plates with anti-stick coating required for butt fusion. Kit includes attaching screws and wrench.
Includes 4 blades, screws and wrench
Surface hardened for longer life and are serrated for maximum grip.
Convert 1500 PSI machines to 600 PSI machines.
Adjustable pipe stand to properly support, position and align pipe to be fused.Learn More
Reduces the drag on 4" to 18" pipe and protects the pipe from damage. Case includes 40 complete roller assemblies.Learn More
Aids in lifting pipe into the fusion machine and also performs as a stand.Learn More
A pipe-handling system that consists of a series of adjustable racks to store and help install the pipe on the job site.Learn More
Record and document fusion process parameters.
DL16001 - English*
* More languages are available
Provides a convenient place to protect and store your facer out of the dirt and mud.
Self-centering stub end holder to hold stub end for butt fusion.
Set of four 25' Hydraulic extension hoses required for in-ditch fusion. Extension hoses are included with Pit Bull HPU.
Accurately check surface temperatures of heater.
Protect, store and transport inserts and accessories.
Store and transport your machine in this reusable container.