Rugged and reliable, the Pit Bull 412 was built for jobsites where wheeled or tracked vehicles are not needed. Ready for the ditch or any other tight space, the Pit Bull 412 is as tough as they come. The machine is compact while retaining many of McElroy's popular features including the patented Centerline Guidance System for equal distribution of force around the joint.
A Hydraulic Clamping kit is available for all Pit Bull 412 models. Add HC to the end of the part number or select the Hydraulic Clamping option while customizing your machine package.
|Pit Bull® 412|
|4-Jaw Carriage||359 lbs (163 Kg)|
|3-Jaw Carriage||261 lbs (118.4 Kg)|
|Facer||62 lbs (28.1 Kg)|
|Heater||24 lbs (10.9 Kg)|
|Hydraulic Power Unit (HPU)||390 lbs (176.9 Kg)|
|Pit Bull® 412|
|Frame||Welded steel construction|
|Pit Bull® 412||Hydraulic Power Unit (HPU)|
|Length||44" (1118 mm)||N/A||48" (1219 mm)|
|Width||38" (965 mm)||N/A||32.5" (826 mm)|
|Height||28" (711 mm)||N/A||41" (1036 mm)|
Includes extension hoses and lifting assembly.
Includes 6 blades, screws and wrench. Must be repositioned for different pipe sizes.
Includes 6 blades, screws and wrench. Spans entire facer range without repositioning.
Set of two plates with anti-stick coating required for butt fusion. Kit includes attaching screws and wrench.
Surface hardened for longer life and are serrated for maximum grip.
Microprocessor-controlled with dial thermometer to monitor temperature.
1242112 - 240V
Holds heater for easier carrying and protection. Helps maintain constant temperature.
Adjustable pipe stand to properly support, position and align pipe to be fused.Learn More
Reduces the drag on 4" to 18" pipe and protects the pipe from damage. Case includes 40 complete roller assemblies.Learn More
A pipe-handling system that consists of a series of adjustable racks to store and help install the pipe on the job site.Learn More
Record and document fusion process parameters.
DL16001 - English*
* More languages are available
Self-centering stub end holder to hold stub end for butt fusion.
Branch saddle tapping tool for polyethylene pipe.
Used for fusing outer pipe of a dual-containment system
Ideal for handling 40' bundles or a single joint of pipe.
Trim the bead created during the fusion process.
Accurately check surface temperatures of heater.
Set of four 25' Hydraulic extension hoses required for in-ditch fusion. Extension hoses are included with Pit Bull HPU.
For use with non-automated machines when fusing in-ditch. Plug Type C .
Provides a convenient place to protect and store your facer out of the dirt and mud.
For fusing two materials with different melt rates. Shields the faster melt rate materials from over-melting.