Customize Your Machine Package

Butt Fusion Inserts

Butt Fusion Insert

McElroy fusion machines will fuse a range of pipe sizes. To be able to fuse multiple pipe sizes you will need to purchase inserts for the pipe sizes you want to fuse. Inserts are made for one size pipe only and not all inserts fit directly in the jaws. Some inserts nest inside other inserts, called master inserts. These master inserts will need to be purchased also.

Set = 8 Inserts

Selected Machine

DynaMc® 250, 4-Jaw, 120V - A887001

DynaMc<sup>®</sup> 250 Auto

All inserts below fit in DynaMc® 250 jaws

     Inserts Pipe OD Part No.
   225mm/250mm 8.86 (225mm) T2503507
   8"IPS/250mm 8.63 (219mm) T2503504

All inserts below require 8"IPS/250mm insert

     Inserts Pipe OD Part No.
   200mm 7.87 (200mm) 801511
   180mm/7.125" OD 7.13 (180mm) 801513
   6" DIPS 6.90 (175mm) 801525
   6" IPS Master 6.63 (168mm) 801510
   160mm 6.30 (160mm) 807813

All inserts below require 6" IPS Master insert

     Inserts Pipe OD Part No.
   5" IPS 5.56 (141mm) 809409
   140mm 5.51 (140mm) 809428
   5.375" OD 5.38 (137mm) 809411
   5.25" OD 5.25 (133mm) 809410
   125mm 4.92 (125mm) 809413
   4" DIPS 4.80 (122mm) 809315
   4" IPS/100mm JIS 4.50 (114mm) 809408
   110mm 4.33 (110mm) 809305
   3" DIPS 3.96 (101mm) 809313
   90mm 3.54 (90mm) 809309
   3" IPS 3.50 (89mm) 809304
   75mm 2.95 (75mm) 809211
   63mm 2.48 (63mm) 809209
   2" IPS 2.38 (60mm) 809204

Copyright © McElroy Manufacturing